BZ Solids Control Oil&Gas Drilling Mud Agitator
BZ Solids Control drilling mud agitator is in order to maintain uniformity of drilling fluid and the solid particles suspended, for continuous and reliable of drilling fluid mud generated, mainly make circulating drilling fluid performance is stable, even in mixing, in case of drilling fluid solid particle deposition in the recycling system, has an indispensable position in oil&gas drilling.
The traditional mud agitator uses a single agitator, agitating blade for ordinary fan leaf shape, the mud mixing efficiency is low, agitating is not complete, it is difficult to achieve uniform mixing, stable liquid performance, and in general agitating, there is no efficient processing of large mud solid ability, greatly affected the mixing effect; The traditional mud agitator is fixed in the middle and lower part of the mixing barrel. After agitating for a period of time, there are a lot of precipitates at the bottom of the mixing, resulting in uneven concentration up and down, which can not meet the requirements of mixing, so that the mud loses uniform and stable performance.
BZ Solids Control mud agitator is involved in the technical field of oil drilling machinery and equipment. In order to solve the technical problems of poor agitating efficiency and uneven mixing with the traditional drilling slurry mixer, the BZ slurry Control mixer includes a mixing barrel, a mixing motor and a rotary shaft. Mixing barrel wall is set with inlet, mixing barrel fixed on wall connected to shift gear motor, variable speed institutions below the set has a rotating shaft, shaft by connecting plate fixed on the shift gear, shaft setting of the bottom has a turbine agitator, turbine stirrer including turbine disc, turbine disk fixed on how pieces of turbine blades, turbine blades are fixed in a circle, The rotating shaft is fixed in the middle of the cutting mixing compound device, agitating barrel wall is arranged in the lower part of the protective filter cover, protective filter cover is connected with a discharge pipe, agitating barrel wall is arranged at the bottom of the aeration device; BZ Mg Control Mud mixer has the advantages of high agitating efficiency, good agitating effect and uniform mixing.
BZ Solids Control Drilling mud agitator agitating effect are as follows:
1. The use of a large and a small two agitator for agitating, high agitating efficiency, good agitating effect, uniform mixing; And the mud agitator is turbine type, which can effectively increase the slurry flow velocity in the bucket, so that the slurry around and below can continue to circulate upward, which further increases the mixing uniformity; The cutting section can collide, extrude, break and cut the residual block solids, increasing the solid reaction area, further speeding up the mixing rate, and the precipitate is very little.
2. The hydraulic telescopic device can adjust the working position of the bottom agitator, so that the bottom agitator is extended into the bottom very close to the position of agitator, so that the solid sediment particles fully circulation flow, and then through the cutting part to reduce the number of sediment, further improve the agitator effect.
3. The aeration device for aeration operation, continuous air flow into the mixing barrel, so that the solid precipitate particles follow the bubble upward movement, greatly reduce the precipitate particles, make the sediment basically disappear, so that the solid particles fully suspended, further improve the agitator effect.
4. The mixing barrel is small, the upper round table structure, when the slurry is agitated, the slurry will naturally increase the agitation efficiency in the same power due to the inner wall due to the inner wall due to the inertial performance.
BZ Solids Control mud agitator uses a turbine worm deceleration transmission, with a large transfer torque, smooth operation, reliable operation and other advantages. For more information on BZ Solids Control drilling mud agitator, please contact BZ Solids Control.